1. How can I set up mowing height for a specific zone?
After creating the map of several zones, go to Settings---Mower---Map Management, choose one of the zones, click edit, and click the icon marked in green in the following picture to set the cutting height.
The icons from top to bottom on the right side refer to:
Customize cutting height
Rename the zone
Delete the zone
2. How can I set up the mowing schedule for a specific zone?
After creating the map of several zones, go to Settings---Mower---Mowing Schedule, enable the mowing schedule, and then choose the specific zones when setting up the schedule, see the picture below, please do not forget to save the schedule.
3. How can I mow one of the zones manually?
After creating the map of several zones, you can select to mow all the zones or only one of them.
On the home page of the App, click the icon at the lower right corner of the map (see the picture below), select the zone that you want to mow, save it, and get back to the home page, click “MOW” then the mower will only work on the zone that you selected.
NOTE: After clicking the HOME button and clearing the mowing progress, the mower will start mowing the entire map again, you need to select the zone that needs to be mowed again.
4. How can I clear the mowing progress？
When the mower is mowing, please click Stop and then click HOME in the App first, and then press and hold MOW until a window pops up to clear the mowing progress, the mower will start a new round of mowing.
5. How can I customize the name for different zones?
After creating the map of several zones, go to Settings---Mower---Map Management, choose one of the zones, click edit, and then click the icon with the letter A (see the picture below) to customize the name for the selected zone.
NOTE: Please make sure that the name of the zone is within 12 characters.
6. How to enable/disable Edge Mowing?
Go to Settings---Mower---Edge Mowing to enable or disable it, the mower will mow along the edges if you enable it.
7. How can I prevent the mower from running again when the mowing progress reaches 100% within the mowing schedule?
Go to Settings---Mower---Mowing Schedule to disable the Mowing Cycle (see the picture below) and the mower will not start another round of mowing if the mowing progress reaches 100% before the schedule ends.